Studer Vista, Operating Instructions Manual

Page: 561 / 713

Vista Digital Mixing System
8-38 Vista 8 Differences
SW V3.5 Date printed: 05.04.2005
8.6.10.1 Send Level
When looking at the N–1 out global view (press
GLOBAL VIEW: OUT
), you
will see a level on the bottom rotary. It defaults to 0 dB, which means that
this channel signal is sent to all assigned N–X buses with a post-fader level
of 0 dB. In some cases, a particular channel should have its signal at a
lower level audible on the N–X buses, e.g. when you have a jingle machine
connected and the persons listening to the N–X outputs don't want that sig-
nal to be so loud. It is therefore easy to adjust this level by adjusting the
bottom rotary.
However, this will set the level going to all N–X buses.
8.6.10.2 Offline Conferencing
When configuring the N–X buses, a subset of N–X owner channels may be
defined to be members of a conference. Whenever their fader is closed,
they will automatically hear all other members (without hearing themselves
back), rather than the normal N–X signal. As soon as the fader is opened,
they will instantly hear the N–X signal again.