manualshive.com logo in svg

Studer Vista, Operating Instructions Manual

Share
Download
Studer Vista Operating Instructions Manual Download Page 190

D950/Vista Digital Mixing System 

4-62  GC Operation

 

SW V3.3

Date printed: 05.08.03

4.4.6

 

D950 Strip Setup 

(for Vista Strip Setup, refer to 

chapter 4.4.7

)

The Strip Setup page of the Graphic Controller can be called up in three
different ways:
•

From the Page menu, by clicking on the appropriate menu item;

•

Using the Page icons, by clicking on the appropriate icon in the tool-
bar;

•

Using the 

STRIP SETUP

 function key on the control surface keyboard,

which is probably the fastest way.

The Strip Setup page allows the user to adapt the layout of the Channel
Strips. Using this utility, all the audio channels of various types can be as-
signed (or re-assigned) to the Channel Strips in five Banks, each with two
layers. It shows the currently active Desk Bank with its two layers, and
layout of the channels.

Double-Click on Desired Strip to Change Assignment

Current Assignment of Channels to Desk Strips

Summary of Contents for Vista










































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands