manualshive.com logo in svg

Studer Vista, Operating Instructions Manual

Share
Download
Studer Vista Operating Instructions Manual Download Page 541

Vista Digital Mixing System  

 

 

8-18  Vista 8 Differences

  

SW V3.5

 

Date printed: 05.04.2005

 

 

8.4.2.5

 

  Machine Control (Option) 

 

  An optional machine control panel can be fitted into the Vista 8 control 

bay. This gives control over one external machine using Sony P2 (“Sony 9-
pin”) protocol. Please contact Studer Service & Support for installation in-
structions. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 

 

8.4.2.6

 

  Graphic Controller Keys 

 

 

These keys have the same functionality as the ones on Vista 6 and 7. They 
allow fast access to the most important pages of the graphic controller 
screen.  

 
 
 
 
 
 
 
 

 

The following keys have been added on Vista 8: 

 
 

CLIPBOARD LIBRARY

 

Dedicated key for opening and closing the clipboard library.  

 

(RECALL SNAPSHOT) UNDO

 

Snapshot recall: Hold 

UNDO 

and press 

RECALL SNAPSHOT

; this will undo 

the last snapshot recall. 

 

FILTER OFF

 

Dedicated key for temporarily inactivating snapshot filters. 

 

EDIT FILTER

 

Dedicated key to enter and exit the snapshot isolation “filter edit” mode. 
When lit, all console controls are showing whether or not they are isolated 
against snapshot recalls. The user may modify their state by pressing or 
touching the corresponding controls. Ganging is possible. 

 
 

  This toolbar icon on the graphic controller screen allows access to the 

“Au” control screen. 

Summary of Contents for Vista










































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands