manualshive.com logo in svg

Studer Vista, Operating Instructions Manual

Share
Download
Studer Vista Operating Instructions Manual Download Page 396

D950/Vista7 Digital Mixing System

5-134 

  

Au

SW V3.3

Date printed: 27.08.03

resolution, a much more precise set of elements may be selected than what
is possible using the channel/object selector panels.

An item can be checked or unchecked by clicking on the box next to its
name. Several items may be selected by highlighting the item labels using
the familiar Shift-click and Ctrl-click methods. Once the labels have been
highlighted, Right-clicking will open a pop-up menu that allows the group
to be checked or unchecked.

Notes:

When all items within a channel/object section have been chosen, the as-
sociated selector button(s) will illuminate with a dark blue light and the as-
sociated tree elements will be indicated with a black check. If only part of
a section is chosen, the associated selector buttons will illuminate in light
blue and the tree elements will be checked in gray.
Notice the relationship between the channel/object selector panels and the
tree displays. When an element is chosen using a selector panel, the corre-
sponding element is checked on the tree. Likewise, if an item is checked on
the tree, the corresponding selector button is illuminated.

Summary of Contents for Vista










































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands