Studer Vista, Operating Instructions Manual

Page: 488 / 713

D950/Vista Digital Mixing System
7-22 ConfigTool
SW V3.3 Date printed: 05.08.03
F Tip Please note that if you now display the core View, the lettering “(rough
estimation)” will be missing, indicating that the numbers displayed are
now the real, load-balanced ones.
The displayed warning does not mean that the configuration will not work.
The meaning of the warning will be explained in
chapter 7.5.3.1 .
7.3.4 Transfer the Files to the Console
The Core file and the “meta” VMC files are now ready to be used on a
D950 or Vista console.
On the Studer D950/Vista System If you are running the Session Configuration Tool on the D950/Vista PC
and the search paths are set as described before, there is nothing more you
need to do in order to load a configuration. Simply switch to the
D950/Vista operating system (i.e., the GC) and load a new configuration
from the GC File menu.
On a Separate PC If you are running the Session Configuration Tool on a separate PC, you
will need to transfer the configuration files to the Studer D950/Vista con-
trol PC. Since all files are Windows files, it is a simple matter of using a
transfer medium (floppy, ZIP or even a LAN network) to transport the
files. Care has to be taken to store the files under the appropriate directory
on the Studer D950/Vista control PC as described above. The only files
that must be transferred for each configuration in the above example are:
•
MyConfig.vmc
•
MyConfig.cor
Both files must be in the same subdirectory, otherwise the Studer
D950/Vista will not be able to load this configuration. The best practice is
to always copy the whole folder
<MyConfig>
containing both files and
paste it to the
C:\D950SYSTEMDB
directory.