manualshive.com logo in svg

Studer Vista, Operating Instructions Manual

Share
Download
Studer Vista Operating Instructions Manual Download Page 432

D950/Vista7 Digital Mixing System

5-170 

  

Au

SW V3.3

Date printed: 27.08.03

5.19.1.2.2 

CAS Mute Controls

CAS mute automation controls include the Mute Control Mode keys, the

MUTE STAT

 key, and the 

ON

 key.

CAS ON Key:

The CAS mute key (

ON

 key) is the primary on/off control for the channel

currently assigned to the CAS.

Mute Control Modes:

A set of Control Mode activators are provided exclusively for the CAS
Mute. The CAS mute Control Mode may be selected by pressing the Mute
Control Mode key for the desired mode. Modes may also be selected glob-
ally or locally (via the channel strip for assigned channel).

CAS Mute Control Mode Activators:

•

READ

: READ

•

ISO

: ISOLATE

•

ABS

: WRITE ENABLE

•

TRIM

: TRIM ENABLE

The Control Mode activator for the current mute mode will illuminate.

MUTE STAT Key:

The 

MUTE STAT

  key is the primary control for automating the CAS

mute.

Single Press Functions:

• A single press punches the CAS mute in or out of RECORD if it is en-

abled.

Status Indications:

The 

MUTE STAT

 key provides information about the automation status of

the CAS mute:

• Continuously lit: The mute is in WRITE or TRIM enable.
• Flashing: The mute is in RECORD.

The mute Control Mode is indicated by the illuminated Control Mode acti-
vator:
•

READ

: READ

•

ISO

: ISOLATE

•

ABS

: WRITE ENABLE

•

TRIM

: TRIM ENABLE

Mute Value:

The current value of the last CAS control to be used is shown in the Func-
tion Value display at the top of the CAS.

Summary of Contents for Vista










































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands