Studer Vista, Operating Instructions Manual

Page: 391 / 713

D950/Vista7 Digital Mixing System
Date printed: 27.08.03 SW V3.3
Au 5-129
5.16.2.2 Channel Selector Panel
This panel contains buttons that correspond with the channels that are
present within the active mix. Using these buttons, channels can be se-
lected for editing as follows:
All Chans: selects all channels for editing;
Input: selects all Input channels for editing;
MT Input: selects all Multitrack Input channels for editing;
MT Monitor: selects all Multitrack Monitor channels for editing;
Group Out: selects all Group Output channels for editing;
Master Out: selects all Master Output channels for editing;
Aux Out: selects all Auxiliary Output channels for editing.
Activating the left-hand button at the beginning of each row will select all
channels of that type. If both mono and stereo versions of a particular
channel type are included in the VMC, just the mono or stereo channels
may be selected by clicking on the appropriate button. Channel types
and/or versions may be de-selected after a large selection (such as All
Chans) has been made.
In addition to channel selection, buttons are included that allow editing of
group assignments and Control Group Masters. Channels that contribute to
each group may be also selected for editing
as a group , via these controls.
These buttons function as follows:
Group: selects all items associated with the group (group members, Control Group
Masters, and group assignments) for inclusion in the edit;
Master: selects Control Group Masters for inclusion in the edit;
Member: selects group members and group assignments for inclusion in the edit.
A set of “Group”, “Master”, and “Member” buttons is provided for each
group. The top row of buttons act as global selectors for the group controls
below.
The assignments of channels as group members are stored as part of the
mix data and may be unique to each mix. Therefore, only groups that have
channels assigned as members will have “Member” buttons available with