Studer Vista Page 512 Operating Instructions Manual Download

Page: 512 / 713

D950/Vista Digital Mixing System

7-46 ConfigTool

SW V3.3

Date printed: 05.08.03

7.4.7.7

The Options Menu

Core Constants

For Specialists Only!

You are not allowed to change anything here, even if you are an expert
user.

Directories / Files...

Allows to edit the

D950CfgTool.Ini

file, as described in the previous

chapters.

7.4.7.8

The Window Menu

This menu contains standard functions for windows management. Multiple
windows and copies of existing windows are allowed.

New Channel Bus

Opens a new Channel Bus page, or, if there are already Channel Bus
pages, creates a new copy of the page.

New Interface

Opens a new Interface page, or, if there are already Interface pages, creates
a new copy of the page.

New Core

Opens a new Core page, or, if there are already Core pages, creates a new
copy of the page.

New Tree

Opens a new VMC Tree dialog.

Cascade

Arranges the Workspace as cascaded windows.

Tile

Arranges the Workspace as tiled windows.

1, 2, 3, ...

Brings the selected page to the top of the workspace

Summary of Contents for Vista










































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista

Reviews:

Related manuals for Vista

Brands by name

Popular brands

Studer Vista, Operating Instructions Manual

Search results

Summary of Contents for Vista

Reviews:

Related manuals for Vista

Brands by name

Popular brands