manualshive.com logo in svg

Studer Vista, Operating Instructions Manual

Looking for a seamless audio experience? Introducing the Jaybird Vista: the ultimate wireless earbuds for fitness enthusiasts. With the Quick Start Manual, you can easily set up your device hassle-free. Feel free to download your user manual for free at manualshive.com, and enjoy your workouts without any distractions.

Share
Download
background image

Vista Digital Mixing System  

 

 

8-2  Vista 8 Differences

  

SW V3.5

 

Date printed: 05.04.2005

 

8.6.4

 

Muting Pre-Fader Auxiliaries upon Channel Mute............................................................................................32

 

8.6.5

 

 View MISC and CHANNEL with 

×

 (Shift) Key .............................................................................................33

 

8.6.6

 

Single Fader Switch to Second Layer ................................................................................................................33

 

8.6.6.1

 

Second Layer Disabled (Classic Operation) ..................................................................................................34

 

8.6.6.2

 

Second Layer Enabled ...................................................................................................................................34

 

8.6.6.3

 

Displaying Both Layers at the Same Time.....................................................................................................34

 

8.6.7

 

Naming Auxiliary Buses ....................................................................................................................................35

 

8.6.8

 

Matrix Buses ......................................................................................................................................................36

 

8.6.9

 

Multi-Track Buses with Switch for Pre-/Post-Fade and Pan On/Off.................................................................37

 

8.6.10

 

N–X....................................................................................................................................................................37

 

8.6.10.1

 

Send Level .....................................................................................................................................................38

 

8.6.10.2

 

Offline Conferencing .....................................................................................................................................38

 

8.6.10.3

 

Setting up the Offline Conference..................................................................................................................39

 

8.6.10.4

 

Talk to the Conference ...................................................................................................................................39

 

8.6.10.5

 

Deactivate Conference Temporarily ..............................................................................................................39

 

8.6.10.6

 

Conference Level ...........................................................................................................................................40

 

8.6.10.7

 

Monitoring the Conference Using the MPX Bus ...........................................................................................40

 

8.6.10.8

 

Adding On-Air Signal to the Conference.......................................................................................................40

 

8.6.10.9

 

Alternate Signal to N–X Outputs (CUE) .......................................................................................................41

 

8.6.11

 

D21m I/O System...............................................................................................................................................42

 

8.6.11.1

 

Automatic Detection of I/O Setup..................................................................................................................42

 

8.6.11.2

 

Enhanced Surveyor Information ....................................................................................................................43

 

8.6.11.3

 

Automatic Generation of Intelligent Fixed Labels.........................................................................................44

 

8.6.11.4

 

Functionality of the D21m Mic/Line Input Card ...........................................................................................45

 

8.6.12

 

VCA-Style Masters (“Motors Off” Option).......................................................................................................46

 

8.6.12.1

 

Hierarchical CGMs ........................................................................................................................................47

 

8.6.13

 

Fast Adjustment of DIM and PFL/SOLO Offset Level .....................................................................................48

 

8.6.13.1

 

Control Room DIM Level Adjustment ..........................................................................................................48

 

8.6.13.2

 

Studio DIM Level Adjustment.......................................................................................................................48

 

8.6.13.3

 

PFL and SOLO Offset Level Adjustment ......................................................................................................48

 

8.6.14

 

3

rd

-Party Control of Console Patch (Native ProBel Support) ............................................................................49

 

8.6.14.1

 

Exclude Certain Patch Targets from Being Changed by Snapshots ..............................................................53

 

8.6.14.2

 

Label Import from 3

rd

-Party Systems .............................................................................................................53

 

8.6.15

 

Support of External Monitoring Source Selector Panels ...................................................................................54

 

8.6.15.1

 

Patch Point Isolation ......................................................................................................................................54

 

8.6.15.2

 

Patch Mapping Setup .....................................................................................................................................54

 

8.6.16

 

Fader Ramp Control (“Audio Follows Video”) .................................................................................................55

 

8.6.17

 

Option: Remember PFL State in Broadcast PFL Mode .....................................................................................56

 

 
 

Summary of Contents for Vista










































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Vista

Samson TM300 Owner'S Manual preview
TM300
Brand: Samson Pages: 58
Varimixer W80 Spare Part And Operation Manual preview
W80
Brand: Varimixer Pages: 29
OPW M2010-EU Installation Manual preview
M2010-EU
Brand: OPW Pages: 149
Mutable Instruments Shades User Manual preview
Shades
Brand: Mutable Instruments Pages: 3
Kambrook KHM300 Series Instruction Booklet preview
KHM300 Series
Brand: Kambrook Pages: 24
Behringer DIGITAL iPAD/TABLET MIXER iX16 Brochure preview
DIGITAL iPAD/TABLET MIXER iX16
Brand: Behringer Pages: 4
Professional Sound Corporation DV Promix 3 Quick Start Manual preview
DV Promix 3
Brand: Professional Sound Corporation Pages: 4
Fama PLANETARIA PA10 Installation, Operating And Service Instructions preview
PLANETARIA PA10
Brand: Fama Pages: 26
Clatronic Profi Cook UM 290 Instruction Manual & Guarantee preview
Profi Cook UM 290
Brand: Clatronic Pages: 54
JTS PMM-4 Manual preview
PMM-4
Brand: JTS Pages: 8
Avid Technology MC Pro Operation Manual preview
MC Pro
Brand: Avid Technology Pages: 156
YORKVILLE YS1083 Owner'S Manual preview
YS1083
Brand: YORKVILLE Pages: 20
Mackie HUI Reference Manual preview
HUI
Brand: Mackie Pages: 36
ARESA 121824 Instruction Manual preview
121824
Brand: ARESA Pages: 14
Yamaha MC-Series Operating Manual preview
MC-Series
Brand: Yamaha Pages: 16
Draper PM1400 Instructions Manual preview
PM1400
Brand: Draper Pages: 16
Draper 01099 User Manual preview
01099
Brand: Draper Pages: 20
Samson S-patch plus Owner'S Manual preview
S-patch plus
Brand: Samson Pages: 8

Brands by name

Popular brands

Load more brands