manualshive.com logo in svg

Studer Vista, Operating Instructions Manual

Looking for a seamless audio experience? Introducing the Jaybird Vista: the ultimate wireless earbuds for fitness enthusiasts. With the Quick Start Manual, you can easily set up your device hassle-free. Feel free to download your user manual for free at manualshive.com, and enjoy your workouts without any distractions.

Share
Download
background image

 

 

Vista Digital Mixing System

 

Date printed: 17.06.08 

SW V4.0 

Software V4.0   1 

 

VISTA SW V4.0, DIFFERENCES AND NEW FEATURES 

Please insert this document at the end of  chapter 10 of your Vista operating instructions folder. 

A

 

"5.1 Channels" (SCore Live only) ................................................................................................................................... 3

 

A.1

 

Introduction ................................................................................................................................................................. 3

 

A.1.1

 

Channel Patch ...................................................................................................................................................... 4

 

A.1.2

 

"Upmix" Panner for Stereo Channels .................................................................................................................. 4

 

A.1.3

 

New Surround Bus Order .................................................................................................................................... 5

 

A.1.4

 

Monitoring........................................................................................................................................................... 6

 

A.1.5

 

Metering .............................................................................................................................................................. 7

 

A.2

 

Parameters ................................................................................................................................................................... 8

 

A.3

 

Global Views ............................................................................................................................................................... 9

 

A.3.1

 

Input Parameters .................................................................................................................................................. 9

 

A.3.2

 

Pre-Amp Remote Parameters ............................................................................................................................ 10

 

A.3.3

 

Direct, Multi-Track and N–1 Output Parameters .............................................................................................. 11

 

A.3.4

 

Mono AUX Parameters ..................................................................................................................................... 12

 

A.3.5

 

Stereo AUX Parameters..................................................................................................................................... 12

 

A.3.6

 

Filter Parameters................................................................................................................................................ 13

 

A.3.7

 

Delay and Insert Parameters .............................................................................................................................. 14

 

A.3.8

 

Compressor/Limiter Parameters ........................................................................................................................ 15

 

A.3.9

 

Expander/Gate Parameters ................................................................................................................................ 16

 

A.3.10

 

EQ Parameters ................................................................................................................................................... 17

 

A.3.11

 

Panning Parameters ........................................................................................................................................... 18

 

A.3.12

 

Global Bus Assignment View ........................................................................................................................... 19

 

A.4

 

Channel-Related Views ............................................................................................................................................. 20

 

A.4.1

 

Dynamics Parameters ........................................................................................................................................ 20

 

A.4.2

 

EQ / Filter Parameters ....................................................................................................................................... 22

 

A.4.3

 

Panning Parameters ........................................................................................................................................... 23

 

A.4.4

 

Channel View .................................................................................................................................................... 25

 

A.4.5

 

Misc View (Miscellaneous Parameters) ............................................................................................................ 27

 

A.4.6

 

Bus Assignment View ....................................................................................................................................... 28

 

B

 

Vintage Dynamics (SCore Live only)............................................................................................................................. 29

 

B.1

 

Introduction ............................................................................................................................................................... 29

 

B.2

 

Block Diagram........................................................................................................................................................... 29

 

B.3

 

Global View .............................................................................................................................................................. 30

 

B.3.1

 

Vintage Compressor Parameters........................................................................................................................ 30

 

B.3.2

 

Vintage Expander/Gate Parameters................................................................................................................... 31

 

B.4

 

Channel-Related View............................................................................................................................................... 32

 

B.4.1

 

Vintage Dynamics Parameters........................................................................................................................... 32

 

 

Summary of Contents for Vista










































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Vista

Vitrex Power Mixer Plus Owner'S Safety And Operating Manual preview
Power Mixer Plus
Brand: Vitrex Pages: 4
Imer Group 1194300 Operating, Maintenance, Spare Parts Manual preview
1194300
Brand: Imer Group Pages: 39
Tascam XS-8 Owner'S Manual preview
XS-8
Brand: Tascam Pages: 40
Omnitronic TRM-422 User Manual preview
TRM-422
Brand: Omnitronic Pages: 20
Altrad ATIKA Compact 140L Original Instructions Manual preview
ATIKA Compact 140L
Brand: Altrad Pages: 76
Windmere togo MXB-5 Use And Care Book preview
togo MXB-5
Brand: Windmere Pages: 2
Fairlight Prodigy Edit User Manual preview
Prodigy
Brand: Fairlight Pages: 148
Samson SASM4 Owner'S Manual preview
SASM4
Brand: Samson Pages: 12
Samson MDR1248 Owner'S Manual preview
MDR1248
Brand: Samson Pages: 28
Siemens MQ964 Series Instruction Manual preview
MQ964 Series
Brand: Siemens Pages: 108
Russell Hobbs 18275-56 Insrtructions preview
18275-56
Brand: Russell Hobbs Pages: 46
Rane FLM 82 Operating And Service Manual preview
FLM 82
Brand: Rane Pages: 4
Salton KM1390 Instruction Booklet preview
KM1390
Brand: Salton Pages: 14
Toastmaster TMSM350 Use And Care Manual preview
TMSM350
Brand: Toastmaster Pages: 26
Morgan MSM-NB250HM User Manual preview
MSM-NB250HM
Brand: Morgan Pages: 4
Alesis MultiMix 10 Wireless User Manual preview
MultiMix 10 Wireless
Brand: Alesis Pages: 24
Dangerous Music 2-BUS+ User Manual preview
2-BUS+
Brand: Dangerous Music Pages: 20
JB Systems CD200 Operation Manual preview
CD200
Brand: JB Systems Pages: 28

Brands by name

Popular brands

Load more brands