manualshive.com logo in svg

Studer Vista, Operating Instructions Manual

Share
Download
Studer Vista Operating Instructions Manual Download Page 112

Vista Digital Mixing System 

3-38  Parameters

SW V3.3

Date printed: 05.08.03

3.5

 

Views in Automation Mode

In automation mode, the channel strips hold additional indications for de-
tailed display of the current status.
This chapter shows all possible indications of automation  status  and ex-
plains their meaning.

First, there are some record indicators integrated within the recording
keys:

[A]

Recording overview for switches. If half-lit: One or more switches are
armed (i.e. in TRIM or WRITE enable mode). If fully lit: One or more
switches are recording.
Pressing this key will either punch in the held objects, or punch out the
switches currently recording.

[B]

Recording overview for rotary encoders. If half-lit: One or more rotaries
are armed (i.e. in TRIM or WRITE enable mode). If fully lit: One or more
rotaries are recording
Pressing this key will either punch in the held objects, or punch out the
rotaries currently recording.

[C]

Current and replay value of the channel mute. If the current value is differ-
ent from the one in the last mix pass, this LED indicates the value within
the last mix pass, while the main red LED within the key indicates the cur-
rent value.

This LED is also used for mute indication, if "solo in place" is active.

[D]

Recording of the channel mute. If half-lit: Channel mute is armed (i.e. in
TRIM or WRITE enable mode). If fully lit: Channel mute is recording.
Pressing this key will either punch in the current MUTE status, or punch it
out of recording.

[E]

Recording of fader. If half-lit: Fader is armed (i.e. in TRIM or WRITE
enable mode). If fully lit: Fader is recording.
Pressing this key will either punch in the current fader status, or punch it
out of recording.

[A]
[B]

[C]

[D]

[E]

Summary of Contents for Vista










































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands