manualshive.com logo in svg

Studer Vista, Operating Instructions Manual

Share
Download
Studer Vista Operating Instructions Manual Download Page 237

D950/Vista Digital Mixing System

Date printed: 05.08.03

SW V3.3

GC Operation  4-109

4.7

 

Fourth Level of Operation: SysAdmin Menu

The SysAdmin (System Administration) menu is normally hidden from
view within the Console’s standard operating mode, because it contains
functions that are only useful during building the console and setting it up
for operation. The menu contains various test and configuration possibili-
ties that are not required during normal operation.

Nevertheless, some of the functions from the SysAdmin

 

menu will be ex-

plained here, since they may be useful if the console is radically reconfig-
ured, the Monitoring or Signaling systems are expanded, or some detailed
troubleshooting is required.

How to activate the SysAdmin Mode from Standard Mode

:

Click on the closed padlock icon in the toolbar. You will be asked to enter
the System Administration Password. After completing that, an additional
SysAdmin menu item will be placed in the menu bar.

Summary of Contents for Vista










































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands