manualshive.com logo in svg

Studer Vista, Operating Instructions Manual

Share
Download
Studer Vista Operating Instructions Manual Download Page 188

D950/Vista Digital Mixing System 

4-60  GC Operation

 

SW V3.3

Date printed: 05.08.03

Make:

To make a Cue means:
•

First enter a name within the edit window that appears when you click
the Make

 

button

•

Wait for the right audio event to occur, and click the on-screen  OK
button, or press the 

Enter

 key on the control surface keyboard

A Cue point with the entered name will be generated and stamped with the
current timecode as soon as you click OK or press 

Enter

. You can edit both

name and TC stamp later, if necessary.

Edit:

Opens an edit window that allows changes to be made to the name and the
timecode stamp of a selected Cue from the Cue list.

Delete:

Opens an edit window that allows one or more Cues to be deleted from the
List. Select a Cue in the list by clicking on it, or select any number of Cues
from the List using the familiar Windows multiple-selection techniques.
(Drag trackball or press 

Shift

, and select with the cursor). Click on the

Delete button. This action will bring up a window allowing you to confirm
the Delete operation.

Summary of Contents for Vista










































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands