Studer Vista, Operating Instructions Manual

Page: 419 / 713

D950/Vista7 Digital Mixing System
Date printed: 27.08.03 SW V3.3
Au 5-157
[11] Au Panel Preset Settings (see also chapter 5.14.4 ).
PRE-A...D
– Four locations to store Au Panel settings.
STORE – To store Panel Presets, first set all Au Panel controls to
the desired state. Hold the
STORE
key and press the desired Preset key
(
PRE-A
,
PRE-B
,
PRE-C
, and
PRE-D
).
[12] MIX ON – Turns the Automation system on (see also chapter 5.14.1 ).
READ LOCK
– Forces all controls into Read and blocks out all other con-
trols. Nothing can affect playback of Read Mix (see also chapter 5.15.2 ).
VIEW DYN
– When held, dynamic objects are lit on the surface (see also
chapter 5.14.2 ).
VIEW ALT
– not implemented in V3.2
UNDO – Sets the Read Mix to the previous pass in the Mix Pass Stack (see
also chapter 5.5.1.2 ).
REDO – Sets the Read Mix to the next pass in the Mix Pass Stack (see also
chapter 5.5.1.2 ).
[13]
KILL PASS
– If engaged when timecode is stopped, the new mix pass will
not be written. To prevent a new Mix Pass from being written, press KILL
PASS
before playback of timecode stops (see also chapter 5.5.1.3 ).
[14] Function keys
F1...F3
: Not implemented.
[15]
STATIC DATA
– When lit, this key indicates that Static Data Buffer is ac-
tive and there is a difference between the current Static values and those
stored within the current Mix Pass (Active Pass).
Pressing the
STATIC DATA
key clears the current Static values and those
stored within the current Mix Pass (Active Pass). This function cannot be
undone (see also
chapter 5.14.6 ).
[16]
SCENE
(see also chapter 5.14.7 ).
A Scene is a global snapshot of the automation state of each control within
the system. There are two buffers in which Scenes may be stored. Scenes
will be stored and can recalled during subsequent sessions.
SCENE CAPTURE – Holding the STORE key (see item [11] in the Auto-
Touch+ Panel description) and pressing
SCENE CAPTURE
will “capture” a
Scene in the first buffer. Holding
AUTO MODE
and
STORE
and pressing
SCENE CAPTURE
will “capture” a Scene in the second buffer.
SCENE RECALL
– Will illuminate when a Scene has been captured. Press-
ing SCENE RECALL will “recall” the Scene stored in the first buffer.
Holding
AUTO MODE
and pressing
SCENE RECALL
will recall the Scene
stored in the second buffer.
[17]
LOCAL
,
LOCAL EDIT
,
LOCAL CLEAR
– Not implemented in V3.2