manualshive.com logo in svg

Studer Vista, Operating Instructions Manual

Share
Download
Studer Vista Operating Instructions Manual Download Page 380

D950/Vista7 Digital Mixing System

5-118 

  

Au

SW V3.3

Date printed: 27.08.03

5.15.2

 

Read Lock

Read Lock forces all controls into Read and locks out all changes. While
in this mode, playing back the Read Mix data from the Active Pass is the
only operation possible. This assures the Active Pass will be played back
exactly as saved, which can be quite useful when printing a final mix or
layback.

The 

READ LOCK

 key is located at the top-left of the Au Panel and

will illuminate when engaged.

D950:

Vista:

Conditions:

With 

READ LOCK

 engaged, the following conditions exist:

• All controls are placed into the READ Control Mode and then locked in

READ. Only the stored values of the Active Pass will be heard.
Changes to control values are not possible. All controls are Protected.

• Changes may not be made to Static controls, the Channel Patch, or the

General Patch

• Control Mode changes are locked out
• Controls may not be placed in a Held state (

TOUCH HOLD 

defeated)

• All Record functions are defeated (

TOUCH RECORD

, 

GLOBAL RECORD

PUNCH IN/OUT

)

• All Audition functions are defeated

•

SCENE RECALL / RCL

 is defeated

Summary of Contents for Vista










































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands