Studer Vista, Operating Instructions Manual

Page: 347 / 713

D950/Vista7 Digital Mixing System
Date printed: 27.08.03 SW V3.3
Au 5-85
• The Master Panel
EXTEND BACK TO: PUNCH IN
and
BEGIN
keys may be
overridden by checking options on the <Master Panel Overrides> sec-
tion of the Master Panel Options page. Faders and Encoders can have
EXTEND BACK TO: PUNCH IN and/or BEGIN set to <OFF> or to follow
the Master Panel <Follows Panel>.
EXTEND BACK TO: PUNCH IN
and/or
BEGIN for Switches can also be set to <OFF> or be set to follow the
Master Panel <Follows Panel>.
5.9.3 Glide
Au provides extensive “Glide” functions. Glide determines how
the new data transitions to old data and vice versa. The behavior of the
Glide functions are determined by the specified Glide Time and the en-
abled Glide options.
Glide allows Record Data to transition to and/or from Read Mix Data over
a user-specified period of time. Controls can “glide” from their Record
values back to their Read Mix values at the desired “Write To:” location.
Unlike many other automation systems, controls can also Glide from the
Read Mix value to the Record values at the desired “Extend Back To:” lo-
cation.
Real-time/Post Process Glides: Glide operations may take place in real-time or as a post Record pass proc-
ess. Refer to the “Write To:” or “Extend Back To:” paragraphs above.
Glide functions are engaged by pressing the
GLIDE
key in the Mix Pass
section of the Au Panel. When Glide is active the GLIDE key will
illuminate.
Note: If no Glide Options are selected in the Glide Options page, then no glide
functions will take place within the system even if the
GLIDE
key is active.