manualshive.com logo in svg

Studer Vista, Operating Instructions Manual

Share
Download
Studer Vista Operating Instructions Manual Download Page 160

D950/Vista Digital Mixing System 

4-32  GC Operation

 

SW V3.3

Date printed: 05.08.03

4.4.2.6.1 

Method 1: Analog-Style

A lot of D950 users work in this way. Although it is well possible to apply
this working style on a Vista, some typographic issues may come up when
looking at the label display on a Vista desk. 

This is the reason why we rec-

ommend not to work with this method on a Vista console.

The typical method of working in an analog-style environment is as fol-
lows:

1

The user decides which sources are to be connected to which physical
channels on the console. This will be the channel strip layout. The
user then labels the channel strips with labels that are sensible for the
sources connected to the respective channels. These could be thought
of as the “session” labels, i.e. they only remain valid for that particular
session, for example: Violin 1, WW, Bass, DAT, etc.

2

The user patches the audio sources to the respective channels, i.e.
Mic 16 to Channel 1 labeled Vln 1, DAT output to Stereo Channel 1
labeled DAT.

In other words:  You name your channels for each of your sessions, and
normally do not edit any labels within the patch. However, if you change a
patch point to another channel, you will most probably have to rename the
channels as well, since e.g. “Vocal Left” was moved to another channel.
With this method,  the  channel  displays  are an electronic replacement of
the tape  you  had  stuck across your analog console in order to name the
channels.
In this way of working, you will type your  “track sheet” (e.g.  “Vocal
Left”) within the Channel Patch window.

How to Proceed:

•

Switch 

off 

the “Overwrite Channel User Labels with Device Labels”

option in the SysAdmin/Device Labels menu.

•

The  “Use Device Labels”  option  in the SysAdmin/Device Labels
menu  doesn't help you  either,  since you will most likely not look at
these labels while working.

•

In order to have your studio environment visible (e.g. “Mic 16”), you
will most likely want to edit the User  Label of your patch sources.
Since one of the copying mechanisms is always active (see above),
you will have that information also available in the  “INHERITED
LABEL” field of the connected channels. In this example, the labels
in the various locations will look like as follows:

General Patch

Fixed Label

General Patch

User Label

Channel Patch

Fixed Label

Channel Patch

User Label

Channel Patch

Inherited Label

M25 M B0 In1 Ch25

M16  Mic 16

Im01 Imp m 01 In 1

Vln

M16  Mic 16

When working with labels in this way,  you  should work in “Show User
Labels” mode at all times.

Summary of Contents for Vista










































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands