manualshive.com logo in svg

Studer Vista, Operating Instructions Manual

Looking for a seamless audio experience? Introducing the Jaybird Vista: the ultimate wireless earbuds for fitness enthusiasts. With the Quick Start Manual, you can easily set up your device hassle-free. Feel free to download your user manual for free at manualshive.com, and enjoy your workouts without any distractions.

Share
Download
background image

D950/Vista7 Digital Mixing System

Date printed: 27.08.03

 SW V3.3

Au   5-123

Note: 

Automated Graphic Controller items are not selectable using the Object
Picker for the Event List Filter.

Note:

If objects are selected for display that do not have recorded Events, the
Event List will be empty. 

Event List Display:

Selected Events may be displayed in a number of ways.

• Individual Events: Individual Events will be displayed next to their

timecode location. The Event label contains the channel type, channel
number, control, and control value. Timecode locations are always
shown for each individual Events.

• Consolidated Event Lists: Only timecode locations with recorded

Events are displayed. If only a single Event is recorded, it will be dis-
played. If multiple Events have been recorded at the same timecode lo-
cation, an Event List header will be shown, but the contents will not be
displayed. The header label will indicate the number of Events in the
list and contains a 

+

 button. Clicking the + button will expand the list,

its contents will be displayed, and the +

 

button changes to a 

– 

button.

Clicking the 

– 

button will close the list.

• Expanded Event Lists: All Events are shown individually. If an Event is

part of an Event List, the header will be the first item for that particular
timecode location.

Using the display modes listing above, any combination of displays may be
accomplished.

Important Note:

The use of the term “Mute” is used literally in the Event List Editor. If the
Mute is listed as “ON” in the Event List, the post fader channel output will
be cut. Muting will be activated. The associated key on the work surface
will not be illuminated (channel 

MUTE

 key on Vista and channel 

ON

 key on

D950). This may be a source of confusion for D950 users because the
channel is “off” and the 

ON

 key is not lit when the Event List indicates the

mute is “On.” 

Note:

The Event List Editor only shows a subset of all the events stored within a
Mix Pass. Making an edit can change what is shown and depending on the
edit performed, some events may drop off the list.

Note:

Timecode locations without recorded Events will not be displayed in the
Event List Editor.

Selecting Events to be Edited: 

From the Events chosen for display, single Events, an entire Event List, or
a selected group of Events and/or Event Lists may be chosen for editing.

Summary of Contents for Vista










































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Vista

Bamix Mono Instructions For Use Manual preview
Mono
Brand: Bamix Pages: 11
Veeder-Root TLS-350 Series System Setup Manual preview
TLS-350 Series
Brand: Veeder-Root Pages: 227
Veeder-Root TLS-450 Setup And Operation preview
TLS-450
Brand: Veeder-Root Pages: 408
Ratek RSM7DC User Manual preview
RSM7DC
Brand: Ratek Pages: 16
Sanlida SM-1502 Instruction Manual preview
SM-1502
Brand: Sanlida Pages: 6
Redmond HM1008G-UL User Manual preview
HM1008G-UL
Brand: Redmond Pages: 7
Optimum RK-0245 Operating Instructions Manual preview
RK-0245
Brand: Optimum Pages: 36
Ratek BTR10-12V User Manual preview
BTR10-12V
Brand: Ratek Pages: 16
Skyfood BPS-06-N Instruction Manual preview
BPS-06-N
Brand: Skyfood Pages: 24
Black+Decker BXKM1000E Original Instructions Manual preview
BXKM1000E
Brand: Black+Decker Pages: 56
Cimo ST. LOUIS MINIMIX Instruction Manual preview
ST. LOUIS MINIMIX
Brand: Cimo Pages: 10
Frigidaire FD5122 Instruction Manual preview
FD5122
Brand: Frigidaire Pages: 9
Singer SDM-1045BLIN Instruction Manual preview
SDM-1045BLIN
Brand: Singer Pages: 16
Samson L2400 Product Specification Sheet preview
L2400
Brand: Samson Pages: 3
Barnstead International Maxi-Mix 1329 Series Operation Manual preview
Maxi-Mix 1329 Series
Brand: Barnstead International Pages: 8
Braven Fuse Quick Start Manual preview
Fuse
Brand: Braven Pages: 74
Mellerware PRIMA 150W Manual preview
PRIMA 150W
Brand: Mellerware Pages: 16
OBH Nordica Easy Mix 6789 Instructions For Use Manual preview
Easy Mix 6789
Brand: OBH Nordica Pages: 24

Brands by name

Popular brands

Load more brands