manualshive.com logo in svg

Studer Vista, Operating Instructions Manual

Looking for a seamless audio experience? Introducing the Jaybird Vista: the ultimate wireless earbuds for fitness enthusiasts. With the Quick Start Manual, you can easily set up your device hassle-free. Feel free to download your user manual for free at manualshive.com, and enjoy your workouts without any distractions.

Share
Download
background image

D950/Vista Digital Mixing System

Date printed: 05.08.03

SW V3.3

GC Operation  4-129

when the group is formed – they are grouped in a relative way. If absolute
grouping is desired, values can be copied from the master to the members:
•

By checking the Copy Enable checkbox and clicking on Copy;

•

By completing the editing of a group while the Copy Upon Setup
checkbox is checked.

There is also a context menu available, called up by right-clicking within
the edit dialog:
•

If the cursor is placed over the Select items, the menu allows to check
or clear all select boxes;

•

If the cursor is placed over the Copy column, the menu allows to
check  and clear all copy parameters;

•

and if it is placed over a white space, it does both.

Note:

The Control Group Filter dialog box can also be started by clicking on the
Control Group Filter item on the Options menu of the Graphic Controller.
Clicking on the Close button does 

not 

terminate the Desk editing mode.

Absolute/Relative 

Faders are implicitly controlled in a relative way. This means that all the
members will remain in relative positions to each other when the Master
Fader (or other control) is moved. The member Faders can be forced to
match the Master Fader using the Copy function in the Control Group Fil-
ter dialog, see above.
Muting can be controlled absolutely and relatively. The relative (Toggle)
mode for the Mutes can be selected by the user in the Group Filter dialog.
If selected, the Mutes can be set to On or Off on the members and will be
toggled when the Master Mute is used. If Toggle is not selected, all Mutes
on the members will be forced to the same status as the Master Mute the
next time the Master Mute is used, regardless of their original status.

Member Behavior

When a new member is added to a Control Group, it keeps its values until
a change is made in the Control Group Master. At that moment, the change
is transferred to all members. When a member is separated from a Control
Group it keeps its current setting which includes the Master offset(s) that
have been applied along the way. Member values can be changed locally at
any time, without affecting the status of the other members or of the Con-
trol Group Master.

Over-Range

All controls can have an over-range. The over-range condition can occur if
the Member Fader has reached its top or bottom position while the Master
Fader is still moving. During over-range, the relative levels of the members
are kept intact, even if the Fader (and the audio level) can not move any-
more.
Over-range can be positive or negative. The maximum value of over-range
can be twice the normal working range of the Fader (100 dB) in both up
and down directions.
The over-range of a Member can be zeroed easily. Simply move the Fader
of a Member in over-range by a bit, and the over-range will be zeroed.

Note: 

This will, however, clear the initial relative level of that particular Member
with respect to the other Members.

Snapshots

Control Groups are part of the snapshot. Their data comprise three parts:
•

Members of a Control Group (which channels are Members in a Con-
trol Group);

•

Control Group settings (filter and Copy settings);

•

Parameter values of the Control Group Masters.

Summary of Contents for Vista










































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Vista

Bartscher 135.102 Manual preview
135.102
Brand: Bartscher Pages: 13
Yamaha MG82CX Eigentümer-Handbuch preview
MG82CX
Brand: Yamaha Pages: 21
Sanlida CHEFLEE SM-1519N Instruction Manual preview
CHEFLEE SM-1519N
Brand: Sanlida Pages: 14
Shure Pro Master 700 Service Manual preview
Pro Master 700
Brand: Shure Pages: 51
Hyundai HY-RBC1455-001 User Manual preview
HY-RBC1455-001
Brand: Hyundai Pages: 32
DAPAudio Compact 6.2 D2320 Manual preview
Compact 6.2 D2320
Brand: DAPAudio Pages: 16
Kambrook KSB70 series Instruction Booklet preview
KSB70 series
Brand: Kambrook Pages: 20
Numark DM1295 Owner'S Manual preview
DM1295
Brand: Numark Pages: 12
M-Audio M-Game Solo User Manual preview
M-Game Solo
Brand: M-Audio Pages: 34
Kenmore KKESM600M Use & Care Manual preview
KKESM600M
Brand: Kenmore Pages: 16
Braven Fuse Quick Start Manual preview
Fuse
Brand: Braven Pages: 74
Spirit Monitor 2 User Manual preview
Monitor 2
Brand: Spirit Pages: 19
Denon Professional DN-306X Manual preview
DN-306X
Brand: Denon Professional Pages: 8
OBH Nordica Easy Mix 6789 Instructions For Use Manual preview
Easy Mix 6789
Brand: OBH Nordica Pages: 24
Fortress Technologies FHMI2013 User Manual preview
FHMI2013
Brand: Fortress Technologies Pages: 7
VADDIO PRODUCTION VIEW 999-5650-000 Installation And User Manual preview
PRODUCTION VIEW 999-5650-000
Brand: VADDIO Pages: 24
Gemini MX-02 Operation Manual preview
MX-02
Brand: Gemini Pages: 12
Roland GO:MIXER Owner'S Manual preview
GO:MIXER
Brand: Roland Pages: 8

Brands by name

Popular brands

Load more brands