manualshive.com logo in svg

Studer Vista, Operating Instructions Manual

Share
Download
Studer Vista Operating Instructions Manual Download Page 598

STUDER  

21. Sep. 2004

Release Notes Vista 3.4

9/18

9.

 

Mute Groups

Inherited from the brand new Vista 8, it is now possible to have mute groups available on the Vista 6
and 7! In order to make use of this feature, the user must decide to use 8 source selector keys of

the monitoring section as mute groups. This can be done in the menu "Vista Settings" in the "USER"
menu of the graphical controller screen. Source selectors 9-16 can alternatively be used as mute
group masters.

M  1

M  2

M  3

M  4

M  5

M  6

M  7

M  8

How to setup a mute group?

1.

 

Activate Option "User Source Selector 9-16 as Mute Groups" in the "Vista Settings" menu

in the "USER" menu of the graphical controller screen

2.

 

Hit the "Ctrl Grp Setup"-button  on the control bay. The Mute Group masters (previous

source selector keys) go half lit.

3.

 

Select the mute group you want to setup (one of the source selectors 9-16, representing

mute groups 1-8)

4.

 

A dialog will pop up on the graphical controller screen while you are in this set-up,

allowing you to add all currently muted channels on the console to this mute group with
one mouse click – or clearing all members from the selected mute group. You may also

select or deselect members by the use of their LINK/SEL button.

Summary of Contents for Vista










































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands