Studer Vista, Operating Instructions Manual

Page: 241 / 713

D950/Vista Digital Mixing System
Date printed: 05.08.03 SW V3.3
GC Operation 4-113
A Source or Target can be assigned to any of the Subclasses, but only to
one Subclass at a time .
To reassign an item or items from a Subclass, use the same selection tech-
niques as above. Then you can:
•
Click on the Clear Subclass button to remove the selected items from
the Subclass. This will return the selected items to the Digital Input or
Digital Output Patch Section;
• Click on a different Subclass button to directly re-assign the selected
items from the current Subclass to another Subclass.
The result of this process is that the subclassified sections are now visible
in the Patch lists and can be directly accessed using the right trackball
button. For details, refer to
chapter 4.4.2.3 .
Notes: Subclass names are stored and recalled with User Preferences.
Assignment of individual interfaces to subclasses is stored in each Snap-
shot Preset and can therefor vary from Snapshot to Snapshot.