manualshive.com logo in svg

Studer Vista, Operating Instructions Manual

Share
Download
Studer Vista Operating Instructions Manual Download Page 213

D950/Vista Digital Mixing System

Date printed: 05.08.03

SW V3.3

GC Operation  4-85

4.6.1.1

 

Titles and Projects

The 

Title

 is the main container for all the session data. Titles contain all

Snapshot, Mix, Cue List, Title Memo, and other files that relate to each
session. Titles also contain pointers that recall the appropriate Session
Configuration, Monitor file, and so on.

Titles are found in a Project folder. Project folders may be created along
with a new Title. For example, a Project folder might be created at the start
of an album project when the Title for the first song was made. Subsequent
Titles could be created for each of the other songs and placed in that al-
bum's Project folder. Projects are located in the 

D950PROJECTS

 folder.

New Title:

This action opens a dialog box that enables the creation and selection of a
name for a new Project and/or Title. You can freely create any number of
Projects and Titles.
Let us assume you wanted to create a new Project and Title in the Subdi-
rectory 

D950PROJECTS

. Click on File in the Menu bar, select New Title,

and you’ll end up with a familiar Windows box:

Click on the New Project button and a name entry box will appear. Type in
a new Project name – for example, 

CITY TV1 

– and click OK. A new

folder with the name you just entered will appear in the list. It will be
highlighted in gray, indicating that it has been selected to receive new Ti-
tles. The New Title name entry field (at the bottom of the box) will now
automatically display 

Title #1 

(or the next available number). This will be

highlighted in blue, indicating that it is ready to be over-written with a
proper name, for example, 

BLUES CITY

. Once a new Title name has been

entered, click the New Title button or press the Enter key. The above ac-
tions will perform the following:

Summary of Contents for Vista










































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands