Studer Vista, Operating Instructions Manual

Page: 422 / 713

D950/Vista7 Digital Mixing System
5-160 Au
SW V3.3 Date printed: 27.08.03
WRITE TO: END
– The Last Recorded Value will be applied until the user-
specified End Time. All previously recorded values between the Last Re-
corded Value (typically Punch-out) and the End Time will be erased.
WRITE TO: PUNCH IN – Extend the Last Recorded Value back to the punch-
in location.
WRITE TO: BEGIN
– Extend the Last Recorded Value back to the specified
Begin Time.
[7] Mix Pass WITH: GLIDE (see also chapter 5.9.3 ).
WITH: GLIDE
– Activates the Glide function.
[8]
STOP FRAME
(see also chapter 5.15 ).
STOP FRAME ON – Activates the stop frame automation.
STOP FRAME TC OFF
– Stop Frame recording is suspended. This allows
timecode to be moved backward or forward so a timecode location may be
found. No control values will be written while
TC OFF
is engaged.
[9]
MIX ON
– Turns the Automation system on (see also chapter 5.14.1 ).
READ LOCK – Forces all controls into Read and blocks out all other con-
trols. Nothing can affect playback of Read Mix (see also chapter 5.15.2 ).
KILL PASS – If engaged when timecode is stopped, the new mix pass will
not be written. To prevent a new Mix Pass from being written, press
KILL
PASS before playback of timecode stops. (see also chapter 5.5.1.3 ).
UNDO
– Sets the Read Mix to the previous pass in the Mix Pass Stack (see
also chapter 5.5.1.2 ).
REDO
– Sets the Read Mix to the next pass in the Mix Pass Stack (see also
chapter 5.5.1.2 ).
VIEW
– When held, dynamic objects are lit on the surface (see also chapter
5.14.2 ).
[10] SCENE (see also chapter 5.14.7 ).
A Scene is a global snapshot of the automation state of each control within
the system. There are two buffers in which Scenes may be stored. Scenes
will be stored and can recalled during subsequent sessions.
SCENE CAPTURE
– Holding the
STORE
key (see item [11] in the Auto-
Touch+ Panel description) and pressing SCENE CAPTURE will “capture” a
Scene in the first buffer. Holding
AUTO MODE
and
STORE
and pressing
SCENE CAPTURE
will “capture” a Scene in the second buffer.
SCENE RECALL
– Will illuminate when a Scene has been captured. Press-
ing
SCENE RECALL
will “recall” the Scene stored in the first buffer.
Holding AUTO MODE modifier key and pressing SCENE RECALL will recall
the Scene stored in the second buffer.
[11]
LOCAL
,
LOCAL EDIT
,
LOCAL CLEAR
– Not implemented in V3.2
[12] OPTION A1 / A2 – Not implemented in V3.2