Studer Vista Page 507 Operating Instructions Manual Download

Page: 507 / 713

D950/Vista Digital Mixing System

Date printed: 05.08.03

SW V3.3

ConfigTool 7-41

7.4.7.2

The File Menu

New

Opens a new, empty configuration file called “Untitled”.

Open

Opens an existing

*.vmc

configuration file. First looks into the folder as

stated in the “Options/Directories/Files” menu, usually

C:\D950SYSTEMDB

Close

Closes the current

*.vmc

configuration file.

Save VMC

Saves the current

*.vmc

configuration file under the same name, thus

overwriting it.

Save VMC as...

Saves the current

*.vmc

configuration file under a different name. The

extension

*.vmc

does not have to be typed out. Generates a new folder

with the same name as the

*.vmc

configuration file and saves the

*.vmc

configuration file there.

Save VMC Overview

Saves the Overview of the current

*.vmc

configuration file as a

*.txt

file.

The overview contains condensed information on the current configura-
tion. Example in

chapter 7.4.7.5

Print VMC Overview

Prints the Overview of the current

*.vmc

configuration file. The overview

contains condensed information on the current configuration.

Print Preview

Shows the Overview of the current

*.vmc

configuration file on screen.

Print Setup

Standard Windows printer setup.

Exit

Quits the Session Configuration Tool.

7.4.7.3

The Edit Menu

Remove Last Process

An “Undo” function to remove the last added process (channel, bus,
shared function or interface).

7.4.7.4

The View Menu

Vmc

For Specialists Only!

FuncLib

For Specialists Only!

Log File

Shows the Log File that contains information on the last several Generate
runs. The oldest information is shown at the top of the file.

Tool Bar, Status Bar

Switches the Tool Bar and The Status Bar on and off.

Channel Bus

Brings up the Channel Bus page. For a description, please see previous
chapters.

Interface

Brings up the Interface page. For a description, please see previous chap-
ters.

Shared and External

Brings up the VMC Tree View (see

chapter 7.4.7.5

Core

Brings up the Core page. For a description, please see previous chapters.

Tree

Brings up the VMC Tree View (see

chapter 7.4.7.5

Summary of Contents for Vista










































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista

Reviews:

Related manuals for Vista

Brands by name

Popular brands

Studer Vista, Operating Instructions Manual

Search results

Summary of Contents for Vista

Reviews:

Related manuals for Vista

Brands by name

Popular brands