manualshive.com logo in svg

Studer Vista, Operating Instructions Manual

Share
Download
Studer Vista Operating Instructions Manual Download Page 466

Vista Digital Mixing System 

6-4  Remote Bay

 

SW V3.3

Date printed: 05.08.03

•  The Remote Bay provides exactly the same functionality as a normal

Channel Bay; that is, there are no additional features, neither a talkback
send nor a headphone monitor return.

6.3

 

Applications

The Vista Remote Bay is designed for applications where an additional
console, separate faders, quasi-two-operator mode or remote control of the
main desk is required:

Broadcast - OB Trucks: 

Second, small desk inside the truck or a studio for the control of defined
sources.

Broadcast - OB Trucks: 

Remote bay for the control inside the venue/room or on the stage/front-of-
house for preparation and monitoring purposes

Congress Centers, Theaters - Remote Operation:

Remote bay for preparation work in the audience or on stage; overcomes
the limitations of the control room

Congress Centers, Theaters - Remote Operation:

Remote bay next to the stage (e.g. monitoring), or for control of specific
channels operated e.g. by the producer during the play or event.

All Applications: 

Increase of console size and number of faders of existing Vista consoles
without the need for an all new frame.

Summary of Contents for Vista










































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands