manualshive.com logo in svg

Studer Vista, Operating Instructions Manual

Share
Download
Studer Vista Operating Instructions Manual Download Page 530

 

 

Vista Digital Mixing System

 

Date printed: 05.04.2005 

SW V3.5 

Vista 8 Differences  8-7 

 

 

8.2.6.2

 

  “Small” Switching to the Redundant Control System (Health Check) 

 

 

It is possible to switch to the redundant control system without activating 
the emergency procedure. This may be useful for e.g. a quick health check 
or for maintenance purposes. In this case, only the keyboard, trackball and 
the graphic controller screen is switched over, while the console itself con-
tinues to run using the main control system. Such a security check may be 
performed at any time during console operation. Switchover is done by 

pressing-and-releasing

 the 

×

 (shift) key of the keyboard, followed by 

pressing the “-” key.  

 Note: 

This combination may vary according to the serial number of the console. 
Please refer to the documentation delivered with your console in case the 
key combination described shouldn’t work. 

 
 

Summary of Contents for Vista










































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands