Introduction to the SKF GX Series Microlog
How to Perform a Reset on Your Microlog
How to Perform a Reset on Your Microlog
Should you need to reset your Microlog, you have the option to perform either a hard or
soft reset. A hard reset resets the date, time, and time zone to their default values. A
soft reset preserves these values.
A
reset will not delete data or ROUTEs. The
Setup
mode’s
Memory
field provides several memory operations that may
delete data or ROUTE memory. Reference
Chapter 2, How to
Set Up Your GX Series Microlog
, for more information on
memory operations.
To perform a soft reset:
•
With the Microlog ON, simultaneously hold down the 2,
7, 8, and 9 keys on the
Microlog keypad for approximately 1 second.
•
The Microlog application reboots and the LCD screen loads the SKF title screen,
then the main screen.
To hard reset your Microlog:
•
With the Microlog OFF
, unscrew the battery cover on the back of the unit.
•
Using a 1/16th inch pin or a straightened paper clip, press the reset button located
in the lower left corner of the battery compartment, below the battery.
•
The LCD screen loads the SKF title screen, then the main screen.
The Microlog’s memory may also be initialized using the
Setup
mode’s
Memory/Initialize
option. Reference the
How to Set Up
your Microlog
chapter for more information.
1 - 28
SKF Microlog - GX Series
User Manual
