How to Set Up Your GX Series Microlog
Sensor Setup
Figure 2 - 5.
An
Add Sensor
Screen.
Function Buttons
Help
– Press the
Help
function button to quickly view on-line context sensitive help.
OK
– Press the
OK
function button to save the new sensor’s configuration.
Cancel
– Press the
Cancel
function but to return to the
Sensor Setup
screen without
saving any updated settings.
Use the right arrow key to display the highlighted field’s options.
Press an Enter button, the left arrow key, or the
OK
button to
accept the current selection in all fields / lists.
The following sensor parameters are configured from the
Add Sensor
screen:
Sensor
– Enter the sensor’s unique name (that will identify the sensor in the sensor
list).
Sensor Family
–
Vibration
or
Process
. Specify whether the sensor measures
Vibration
data or plant
Process
data (i.e., temperature, pressure, etc.).
Sensor Units
– From the drop down list, select the measurement units to use for the
sensor’s measurements. This determines the type of measurement the sensor takes.
Displayed measurement units are determined by the
Sensor Family
setting.
Sensor Sensitivity
– Use the numeric keypad to enter the sensor’s sensitivity.
ICP Power
–
On
or
Off
. Select to turn ICP power
Off
or
On
for the sensor.
To view an existing sensor configuration:
•
From the
Sensor Setup
screen, use the up and down arrow keys to highlight the
sensor whose configuration you wish to view and then press the
View
function
button. The
View Sensor
screen displays the sensor’s configuration.
2 - 12
SKF Microlog - GX Series
User Manual