Spindle Test Module
Spindle Tests Overview
Figure 10 – 17.
Run-
Out Test Results.
Clamp Force test overview
Figure 10 – 18.
Perform a Clamp Force Test.
To perform a clamp force test:
•
Visually inspect shaft taper and fingers for wear, and determine if fingers are
missing and/or lack lubrication.
•
Power the Microlog on and select the
Spindle
module’s
Clamp Force
test.
•
Enter the tool holder type, ISO or HSK, and size.
SKF Microlog - GX Series
10 - 13
User Manual
