Introduction to the SKF GX Series Microlog
About This Manual
Hazardous Locations
Hazardous instructions are included with this product.
Avoid Submerging in Water
This equipment has been designed to be splash and dust resistant. However, avoid
direct contact with water, wet surfaces, or condensing humidity. If the instrument is
subjected to these conditions, adverse operation may result, and there is a risk of
serious injury or damage should electrical shock or fire occurs. Allow the instrument to
dry thoroughly before operation. Avoid opening the card slot door in locations where
contact with water or other contaminants may occur.
Avoid Damage and Injury
To avoid costly damage to the instrument or injury from a falling instrument, place the
instrument on a solid stable surface when not in use and do not place any heavy objects
on it.
Use a damp, clean cloth for cleaning. Do not use cleaning fluids, abrasives, or aerosols.
They could cause damage, fire, or electrical shock.
Avoid Battery Compartment Exposure
Do not open the battery compartment in a hazardous area, or in locations where
contact with water or other contaminants may occur.
About This Manual
This manual introduces you to SKF’s GX-R, -M, -F, and -A series Microlog models. It
offers complete and detailed reference to GX-R, -M, -F, and -A model setup screens,
data collection displays, and data review options. This information is essential when
setting up the GX Series Microlog and when using the Microlog to collect and display
machinery data.
User Manual Conventions
As you use this manual, you'll discover certain conventions used:
Bold
type is used to indicate text that appears in a Microlog menu or data
screen.
Italics
are used to emphasize important information.
- are used to indicate notes to the reader.
Step by step procedures are sequenced using bullets, •.
Text specific to the GX-R model is identified with blue colored text and this GX-
R symbol.
The Microlog firmware is available on a Microlog unit with either a Class 1,
Div2, Groups A, B, C, D certification, or an ATEX Zone 2 certification.
1 - 2
SKF Microlog - GX Series
User Manual
