The ROUTE Module
Viewing Dynamic Measurement Data
Figure 3 - 7.
Percent Changed Bar with Overall Overflow.
overall overflow indicator
The bar also displays the percentage of change from the previous overall reading. A
positive percentage indicates the measurement is greater than the previous reading. A
negative percentage indicates the measurement is less than the previous reading. (For
example, "-5%" means that the reading is 5% down from the last reading, or 95% of the
last reading; while "+5%" means that the reading is 5% up from the last reading, or 105%
of the last reading. A display of "+100%" indicates either a 100% increase, in other
words, the new reading is twice the old reading, or that there is either no previous
reading, or the previous reading was 0.)
Function Buttons
Spectral display function buttons include:
1x RPM
– Press the
1x RPM
function button to select the running speed line and select
the speed for the measurement.
FFT Show
must be enabled on the ROUTE hierarchy screen.
Retake
– Press to retake measurement.
Notes
– Press the
Notes
function button to access the Microlog’s
Notes
screen, where
you may view or add coded notes for the current POINT.
For more information, reference the
Coded Notes
section later in
this chapter.
Back
– Press the
Back
button to exit the spectrum display without storing the
measurement data. You return to the
ROUTE
hierarchy list.
Press an Enter button to store the measurement’s data and
return to the ROUTE hierarchy.
Press the Shift button (0 / up arrow) to access alternate function buttons:
3 - 12
SKF Microlog - GX Series
User Manual