Introduction to the SKF GX Series Microlog
Module Management
Figure 1 - 4.
The
Module Manager
Screen.
•
Use the up / down arrow keys to highlight the module whose icon you wish to hide
or show and press the second function button to either
Hide
or
Show
its icon.
If you wish to show or hide multiple modules simultaneously,
highlight each module in turn and press
Select
. A check box
appears next to each selected module. If you select multiple
modules and some are hidden while others are shown, the
Show
/
Hide
button reflects the status of t he highlighted module.
When it is pressed, modules that already reflect that status will
not be affected.
•
Press the
Back
function button when you have finished hiding or showing modules
to exit the Module Manager.
Uninstalling Modules
The
Uninstall
function button on the Module Manager screen allows you to completely
remove highlighted / selected modules from the Microlog’s internal memory. This can
be useful if memory is low and you do not intend to use the module. Refer to the
instructions for hiding module icons, above, and select the
Uninstall
function button
rather than
Hide
.
If you later decide to purchase a module you have uninstalled, it
may be reinstalled. Installing modules is documented in the
Module Manager and Firmware Installation Procedure
document
on the Product CD.
SKF Microlog - GX Series
1 - 11
User Manual
