16 Operating Parameters
16.6 Administrative
422
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
1)
After the parameter changes have been enabled, the device will reset.
2)
After enabling the parameter changes, any currently active Modbus TCP connections will be closed. The
Modbus TCP client must later reopen these connections.
3)
These values are necessary if no Modbus slave device has been configured for the requested Unit ID. If a
Modbus slave device was configured, its values are used.
Unit ID of this device
255
1 to 255
Retry limit
3)
2
0 to 10
Response timeout
3)
10 (* 10 ms)
(1 to 6000) * 10 ms
= 10 ms to 60 s
Protocol IEC 61850
IED Name
SICAM_Q100_01
Max. 60 characters
Only
a to z
,
A to Z
,
_
,
0 to 9
are permitted.
The first character must be a
letter.
Voltage - Dead band
5 %
1 % to 5 %, in 1-% steps
Current - Dead band
5 %
1 % to 5 %, in 1-% steps
Power - Dead band
5 %
1 % to 5 %, in 1-% steps
Power factor - Dead band
5 %
2 % to 5 %, in 1-% steps
Frequency - Dead band
0.05 %
0.02 %
0.05 %
Parameter
Default Setting
Setting Range
MAN_SICAM_Q100_US.book Page 422 Wednesday, June 5, 2019 9:31 AM