Changeover from STRUC V4.x to D7-SYS
System- and communication configuring D7-SYS - SIMADYN D
4-23
Edition 03.2001
in STRUC V.4.x
in D7-SYS
Installing parallel to older
versions
Not possible.
Only one version of STEP7 (and the option
packages for STEP7) can be installed on a PC.
Loading the data medium
Insert the software medium (CD-ROM or floppy
disk No. 1) in the drive ...
init - machine initialization
... and start the "
Setup
" application (in directory
"
disk1
" of the CD-ROM or in the root directory of
the floppy disk).
The "Setup" installation program guides you
through the installation step-by-step. Please
observe the product information supplied with the
data medium.
print - configuring the
printer
Not necessary, all (graphics-capable) printers are
available, which you installed under
Windows 95/NT, under STEP7 (refer above).
acl - setting access
authorization
Not required;
lang - setting the language
Not necessary. You can change the language of
the user interface from STEP7 in the SIMATIC
Manager at any time (menu command
Extras >
Settings, Register side "Language"
).
burn - programmer gets to
know the operating system
Not necessary. To load memory modules offline in
the CFC, all of the installed PCMCIA slots are
available.
Installing software for the
programmer
Not necessary. The required drivers are installed
with the automatic hardware identification function
of Windows 95/NT.
Drivers for many commercially available PCMCIA
cards are already included in the scope of supply of
Windows 95/NT. Drivers for other devices can be
obtained from the appropriate suppliers. The
"PCMCIA assistant" of Windows 95/NT will help
you install the necessary drivers for the PCMCIA
slots.
For further information, please use the help infos
for Windows 95/NT under the subjects "Hardware,
setting-up" and "PCMCIA, activating the support
for".
Installing the user STRUC
G
Not necessary. The installed configuring tools are
available at this PC for all users.
Table 4-18
Comparison of the installation instructions
