Communications configuring
3-214
System- and communication configuring D7-SYS - SIMADYN D
Edition 12.2003
3.19 Parameter access technique for D7-SYS
3.19.1
General description of the parameter functionalityinformation
By appropriately parameterizing using operator control devices for
parameters at the block I/O:
•
Reading values
•
Changing values
•
Changing values and saving in the CPU change (cache) memory
•
Changing interconnections using BICO technology
•
Changing interconnections and saving in the CPU change (cache)
memory
•
Reading parameter descriptive elements
You can be used for the Parameter access technique following hardware
platforms:
•
T400 technology module
•
Application module FM 458
•
SIMADYN D standard CPUs
NOTE
Masterdrives operator control devices, for example, OP1S or
“DRIVE ES”/“DRIVE Monitor“ can be used for parameterization.
3.19.1.1 Parameters
When the parameter access technique for D7-SYS you designate block
inputs or outputs as parameter.
There are two types of parameters:
•
Monitoring parameters
−
These can be configured at the inputs and outputs of blocks
−
Values can only be read.
Hardware
platforms
