In just a few steps to the first project
1-14
System- and communication configuring D7-SYS - SIMADYN D
Edition 12.2001
1.7 Results
You have now got to know some of the simple handling operations in the
CFC configuring. You now know how a project is created using the
SIMATIC Manager, how a CFC Chart is generated and function blocks
inserted from a library. You have interconnected and parameterized the
function blocks. You have generated a program which can run and which
has been downloaded into the CPU. You can observe and modify the
dynamic behavior in the test mode
You can now review the results for the project example "My First Project“
in
process operation
if you have assembled and connected-up the
necessary hardware of the SIMADYN D station (refer to Table 1-1,
Section 1.1.2).
In order to view the sawtooth, you must first connect an oscilloscope to
the SIMADYN D station. The following table shows the assignment of the
pins at output connector X6 of expansion module IT41. The output
voltage range extends from -10 V to +10 V.
Pin
Function
Output
15
Analog output 1
Sawtooth
48
Ground
Table 1-1
Excerpt from the pin assignment of IT41, connector X6
You can observe the running light function at the LED display of interface
module SB10.
1.8
Archiving the project
Step
Procedure
Result
44
In the SIMATIC Manager, select
File > Archive
.
The "archiving" dialog field is displayed.
45
In the dialog field "Archiving", select the user
project with "My First Project“.
Click on
OK
.
The "archiving - select archive dialog field" is
displayed.
The default file "My_first.zip" has already
been entered with archiving path.
46
In the dialog field "archiving - select archive",
when required, change the file name and/or
the path and then click on "save"
The project is now saved in the selected path
and filenames as zip file.
NOTE
When you select menu bar
File > De-archive
, the archived project can
always be re-established with this particular release.
Sawtooth
generator
Running light
