Print St yl e S etting
This setting determines the paper selection condition when printing received faxes. Select
one of the three conditions below.
Print Actual Size C ut off Disabled
The received fax image is printed at full size without dividing it onto multiple sheets of
paper. If the same size of paper or larger paper is not loaded, the fax will be received in
memory and will not be printed until a suitable size of paper is loaded.
However, if the received fax is longer than 11" x 17" (A3) size, it will be automatically
divided onto multiple sheets of paper.
Print Actual Size C ut off Enabled
Each received image is printed at full size. If necessary, the image is divided onto multiple
sheets of paper.
Auto Size Select
Each received image is printed at full size when possible. When not possible, the image is
automatically reduced before printing.
Se t the Telephon e Num ber f or Data Forwarding
When a problem prevents the machine from printing a received fax, the received fax can be
forwarded to another fax machine. This setting is used to program the fax number of the
destination fax machine. Only one forwarding fax number can be programmed (maximum of
64 digits).
To insert a pause between digits of the number, tap the [-] key.
If you wish to specify an F-code confidential memory box in the destination machine, tap
the [/] key after entering the fax number and enter the F-code (sub-address and
passcode).
Rece iving D ate & Tim e Pri nt
Enable this setting to have the date and time of reception printed.
Select [Inside the Received Image] or [Outside the Received Image] for the position where
the date and time is printed.
When [Inside the Received Image] is selected, the date and time of reception is printed on
same size as the origin al.
Standard size s are size s su c h as 8 -1/ 2 " x 11 " an d 8- 1/ 2" x 5- 1/ 2 " (A4 and B5 ).
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ...
http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1256 of 1441
3/17/2016 7:14 AM