Interface and Menus
57 of 132
Publication S177E V2.0 Issue 12/04
8.8.5
Unit Address Setup Menu
1>Masterstation
Modbus slave address
= 1
The master station responds to messages directed at the Modbus slave address set using this page.
Note that in some cases when using Pakscan Generic Modbus protocol settings the master station will
respond to more than one address, and the setting here is the Base address. There is more
information on the base address and offset addresses in the Pakscan Modbus Protocol document
(S171E). Valid Modbus addresses are from 1 to 247 inclusive.
Commands available:
-
Set up the Pakscan data Modbus address
-
Return to previous menu
MENU
1
