Pakscan IIE System Manual
92 of 132
Publication S177E V2.0 Issue 03/05
12.4.1 Setting the Serial Connection Fields
Click on the
Admin Area
then select
Serial
from the menu that appears below Admin Area.
The serial communication screen allows the settings between the bridge and the PS100 module to be
set.
Modbus address:
The address must match the Modbus address set for the master
station under section 8.8.5. The default is address 200.
Mode:
The mode may be Generic Modbus or Yokogawa. For the web
browser to operate and show master station and field unit data this
must be set to Generic Modbus.
Fig 25: Serial Comms to PS100 setup screen
Fig 24: Web Server opening screen
Admin
Area
Serial
