Pakscan IIE System Manual
66 of 132
Publication S177E V2.0 Issue 03/05
The Up and Down arrow
keys are used to scroll
through the field units
CLEAR - Accept alarms
8.9.3
General Purpose Field Unit Status Display
DIN1->DIN8 FCUTAG01
Tag name
Digital inputs
00001111 1
FCU address
Measured value 1
A1= 75% 9>Alms=P
Alarms
Measured value 2
A2= 50% 1>More
Commands page
The status of the eight digital inputs is displayed as eight 0's or 1's. A 1 indicates that the input is true.
The alarms code letters are the same as for an actuator field unit. However, only memory failure (F),
comms failure (C), power on reset (P) and watchdog timer (W) are valid alarms. As with the actuator
page there is a full text display of the alarms that may be found by pressing 9.
Alarms key:
(The letter is present if the alarm has occurred)
F
- FCU memory failure
P
- Power on reset
C
- Communications failure
W
- Watchdog reset
The commands are accessed by going to a second page (press 1). This is because there is more data
than for an actuator field unit.
Commands available:
-
Go to commands page
-
Go to alarm detail page (full text details of field unit alarms)
-
Return to previous menu
MENU
9
1
CLEAR
