rotork Pakscan IIE, System Manual

Page: 121 / 132

Technical Specifications
121 of 132 Publication S177E V2.0 Issue 03/05
16 TECHNICAL SPECIFICATIONS
16.1 Master Station
Enclosure 19” rack to DIN41494 with rear terminals and connectors
Supply Voltage 90 to 264V ac, 43 to 440Hz, Fuse 1 Amp
Power Consumption 30VA for each master station module, 60VA for a hot standby
master station
Current
Loop 20mA 15V max, Pakscan protocol
Cable
Single twisted pair, 500
Ω
max resistance and 3.9
µ
F max
capacitance
Field
Units 240 max Actuator and General Purpose field units
Host
Communications (RS232 or RS485)
Connector 9 way D type
Protocol Modbus RTU
Format Asynchronous
Baud rate 1200, 2400, 4800, 9600, and 19200
Parity Odd, Even, None or Always 0
Stop Bits 1
Host Communications (Ethernet option)
Connector RJ45
Protocol Modbus TCP
Loop Connections Screw clamp terminals suitable for 1.5
2
mm cables
Power Connection IEC connector
Environmental Spec Operating Temperature -10 to 60
o
C
Storage Temperature -10 to +70
o
C
Humidity 5% to 95% RH non-condensing
Relay Contacts 300 mA at 24V dc or 130 mA at 125V ac
16.2 Actuator Field Units
For data on field units fitted inside Rotork actuators refer to the actuator or field unit data sheets. The
integral field units operate in the same environment as the actuator, using the actuator power supply
and communicating commands and data directly with the actuator electronics.