manualshive.com logo in svg

Ricoh IM 550 Series, User Manual, Page: 66 / 344

Share
Download
Ricoh IM 550 Series User Manual Download Page 66

• To log out from the machine, press [Logout] at the top right on the screen, and then press [OK].

DZC192

Logging In Using an IC Card

Hold an IC card over the card reader on the right side of the machine. If the card is not registered on the
machine, enter the authentication information and register the card.

1.

Hold an IC card over the card reader.

DZB640

• When the card is registered on the machine, login operation finishes.
• When the card is not registered, the registration screen is displayed. Proceed to the next step

to register the card.

2.

Enter the Login User Name and Login Password, and then press [Register].

3.

Hold the IC card over the card reader again.

• To log out, hold the IC card over the card reader or press [Logout] at the top right on the screen.
• If another user holds the IC card over the card reader while you are still logged in, you are

automatically logged out and the new user logs in.

1. Getting Started

64

Summary of Contents for IM 550 Series

























































































































































































































































































































































Reviews:

No comments