manualshive.com logo in svg

Ricoh IM 550 Series, User Manual, Page: 23 / 344

Share
Download
Ricoh IM 550 Series User Manual Download Page 23

1. Media access indicator

Flashes when data is being read from or written to an SD card
While the machine is accessing the SD card or USB flash memory device, do not turn the power off or remove
the media.

2. Fax indicator

Indicates the status of the fax function.

• Flashing: transmitting and receiving data
• Lit: receiving data (Substitute RX File/Memory Lock Reception/Personal Box)

3. Data In indicator

Flashes when the machine is receiving data sent from the printer driver or LAN-Fax driver.

4. Status indicator

Indicates the status of the system. Stays lit when an error occurs or toner runs out.
page 219 "Checking the Indicators, Icons, and Messages on the Control Panel"

5. Main power indicator

The main power indicator lights up when you turn on the main power switch. In Sleep mode, it flickers slowly.

Names and Functions of the Control Panel

21

Summary of Contents for IM 550 Series

























































































































































































































































































































































Reviews:

No comments