Ricoh IM 550 Series, User Manual, Page: 295 / 344

Items to check Solution if applicable
Are the side fence and
end fence in the paper
source tray of the
mainframe properly
adjusted to the paper
size? • Adjust the side fence or end fence so that there is no gap
between the fence and loaded paper.
• When loading only a small amount of paper in the tray, adjust
the fences so that they do not press too tight against the paper.
EAT058
• Push the paper tray slowly in to the machine. If the tray is
pushed with force, the side fence may move slightly.
Is the bypass tray used
correctly? • Set the machine in a location where the bypass tray and the
loaded paper do not come in contact with the wall.
• Adjust the paper guides on the left and right sides of the tray to
match the paper size.
• When loading paper that is larger than A4 or 8
1
/
2
× 11 ,
pull out the extender.
EAT771
• Also check the basic procedure for loading paper into the machine again.
page 181 "Loading Paper into the Paper Tray"
When Paper or an Original Is Jammed
293