Ricoh IM 550 Series, User Manual, Page: 268 / 344

Message Cause Solution and reference
"Exceeded max.
number of
alphanumeric
characters." The number of
entered characters
has exceeded the
maximum. Check the maximum number of characters.
See "The Setting Values of the Transmission
Function", User Guide (Full Version).
"Exceeded max.
number of stored files.
Cannot send the
scanned data as
capturing files is
unavailable." Too many files are
waiting to be sent. Try again after they have been sent.
"Exceeded max. page
capacity per file. Press
[Write] to write the
scanned data to the
memory storage
device, or press
[Cancel] to delete." The scan could not be
completed because
the maximum number
of pages that can be
scanned by this
machine was
exceeded during the
scanned data was
written to the memory
storage device. Reduce the number of documents to be written to the
memory storage device, and then try again.
"Exceeded maximum
number of file to store.
Delete all
unnecessary files." Too many files are
waiting to be sent. Try again after they have been sent.
"Insufficient memory in
the memory storage
device." There is no free space
available on the SD
card or USB flash
memory device, or
the file could not be
saved due to
insufficient space on
the media. Change the external media. When scanning an
original in the divide-document or single-page
mode, the saved data may not contain all pages in
the original. Change the external media and press
[Retry] to resume saving the remaining data.
9. Troubleshooting
266