Ricoh IM 550 Series, User Manual, Page: 258 / 344

Message Cause Solution and reference
"Paper size and type
are mismatched.
Select another tray
from the following
and press
[Continue]. To
cancel job, press
[Job Reset]. Paper
size and type can
also be changed in
User Tools." The paper tray
loaded with paper
of the size or type
specified in the
printer driver is not
available. • To proceed with printing after changing the paper
setting, select a tray and press [Continue]. When
Staple, Cover Sheet, Slip Sheet, Chaptering, or
Designate is specified, or when Duplex printing is
specified on a paper tray that does not support the
function, printing cannot be performed. When Sort
is specified, only one copy of the document is
printed.
• To proceed with printing on the specified paper,
load the paper and then check that the paper size
and type are correctly specified in [Settings]
[Tray Paper Settings].
page 181 "Loading Paper into the Paper Tray"
"Parallel I/F board
has a problem." An error has
occurred in the
parallel interface. Turn off the power of the machine, wait for 10 seconds
or more after confirming that the main power indicator is
turned off, and then turn on the power.
page 9 "Turning On and Off the Power"
If the message persists even after you have turned the
power off and then on, consider repairing the machine.
"Printer font error." There is a problem
in the font file of the
machine. Consider repairing the machine.
"Print overrun." A page image is
discarded while
printing the page. Decrease [Resolution] in the printer driver.
See "Applying Different Print Settings Depending on the
Document Type", User Guide (Full Version).
"Receiving data
failed." Transmission of
data was canceled. Send the data again.
"Sending data
failed." Transmission of
data from the
printer driver was
canceled. Check that the computer is operating normally.
9. Troubleshooting
256