manualshive.com logo in svg

Ricoh IM 550 Series, User Manual, Page: 24 / 344

Share
Download
Ricoh IM 550 Series User Manual Download Page 24

Order of Option Installation

When installing multiple options, the following order is recommended:

1.

Attach the paper feed unit.

Attach the paper feed unit to the bottom of the machine.
You can attach up to four paper feed units. Up to 2,000 sheets of paper can be loaded.

2.

Install the caster table.

3.

Install the optional interface board.

Install in the slot of the machine.
Only one interface board can be installed.

4.

Install the file format converter.

5.

Insert SD card options.

Insert in the SD card slot of the machine.
There are two slots for SD cards.
Each slot supports different types of SD cards.
If you want to use two or more SD cards that can be inserted in the same slot, contact your sales or
service representative.

1. Getting Started

22

Summary of Contents for IM 550 Series

























































































































































































































































































































































Reviews:

No comments