Ricoh IM 550 Series User Manual Download Page 309

Page: 309 / 344

Item

Specifications

Gatekeeper

• InnovaPhone VoIP-Gateway IP305

Software version: v7 hotfix (09-70300.17)

• Cisco Gatekeeper

Software version: IOS12.1 (2) T
Platform: Cisco2600XM, 3620, 3640, 3660, 3725, 3745,
7200, 7400

SIP server

• Cisco SIP proxy server

Software version: Version 2.0

• Cisco VoIP-Gateway

Software version: IOS12.3 (17) a
Platform: Cisco3725 (256Mbyte RAM), Cisco2621XM
(128Mbyte RAM)

• Cisco unified CallManager

Software version: Ver10.5.2

• InnovaPhone VoIP-Gateway IP305

Software version: v7 hotfix (09-70300.17)

• Siemens HiPath8000 (Operation confirmed with SIP)

Software version: Voice redundant v4

• Alcatel OXE 4.1.503 (Operation confirmed with SIP)

Software version: 4.1.503

• FaxBack FMIS (Operation confirmed with SIP)

Software version: 8.6.5250.761

• NEC Sphericall (Operation confirmed with SIP)

Software version: 6.0

• AVAYA PBX (Operation confirmed with SIP)

Software version: 5.2.1

• You can assign multiple addresses of the machine in the IPv6 environment, but only one address

can receive IP-fax.

• The SIP connection is specified to connect to either IPv4 or IPv6 depending on the environment of

the machine. To change the setting, contact your local dealer.

List of Specifications

307

Summary of Contents for IM 550 Series

























































































































































































































































































































































Search results

Summary of Contents for IM 550 Series

Reviews:

Ricoh IM 550 Series, User Manual, Page: 309 / 344

Search results

Summary of Contents for IM 550 Series

Reviews: