Raritan PMC-1000, User Manual

Page: 441 / 621

Chapter 5: Using the Command Line Interface
429
Password Aging Interval
This command determines how often the password should be changed.
config:# security loginLimits passwordAgingInterval <value>
Variables:
•
<value> is a numeric value in days set for the password aging
interval. The interval ranges from 7 to 365 days.
Idle Timeout
This command determines how long a user can remain idle before that
user is forced to log out of the BCM2 web interface or CLI.
config:# security loginLimits idleTimeout <value>
Variables:
• <value> is a numeric value in minutes set for the idle timeout. The
timeout ranges from 1 to 1440 minutes (24 hours).
User Blocking
There are different commands for changing different user blocking
parameters. These commands begin with
security userBlocking
.
You can combine multiple commands to modify the user blocking
parameters at a time. See Multi-Command Syntax (on page 504).
Determine the maximum number of failed logins before blocking
a user:
config:# security userBlocking maximumNumberOfFailedLogins <value1>
Determine how long a user is blocked:
config:# security userBlocking blockTime <value2>
Variables:
• <value1> is an integer between 3 and 10, or
unlimited, which sets no
limit on the maximum number of failed logins and thus disables the
user blocking function.
•
<value2> is a numeric value ranging from 1 to 1440 minutes (one
day), or infinite, which blocks the user all the time until the user is
unblocked manually.