Raritan PMC-1000, User Manual

Page: 530 / 621

Chapter 6: Using SCP Commands
518
Scenario 1: Use the default SCP port and default filename

SSH/SCP port is the default (22), and the accessed BCM2 is a standalone device.

The diagnostic file's default filename "diag-data.zip" is wanted. Then add a dot (.) in
the end of the SCP command as shown below.
scp <user name>@<device ip>:/diag-data.zip .
Scenario 2: Specify a different SCP port but use the default filename

SSH/SCP port is NOT the default (22), or the accessed BCM2 is a Port-Forwarding
slave device.

The diagnostic file's default filename "diag-data.zip" is wanted. Then add a dot in the
end of the SCP command as shown below.
scp -P <port> <user name>@<device ip>:/diag-data.zip .
Scenario 3: Specify a new filename but use the default SCP port

SSH/SCP port is the default (22), and the accessed BCM2 is a standalone device.

Renaming the diagnostic file is wanted.
scp <user name>@<device ip>:/diag-data.zip <filename>
Scenario 4: Specify a different SCP port and a new filename

SSH/SCP port is NOT the default (22), or the accessed BCM2 is a Port-Forwarding
slave device.

Renaming the diagnostic file is wanted.
scp -P <port> <user name>@<device ip>:/diag-data.zip <filename>

<user name> is the "admin" or any user profile with the
Administrator or "Unrestricted View Privileges" privileges.

<device ip> is the IP address of the BCM2 whose diagnostic data
you want to download.

<port> is the current SSH/SCP port number, or the port number
of a specific slave device in the Port-Forwarding chain.

<filename> is the new filename of the downloaded diagnostic file.
2. Type the password when the system prompts you to type it.
3. The system downloads the diagnostic data from the BCM2 onto your
computer.